Å·±¦ÓéÀÖ

Okay, big news. I have started .ÌýIt's hard to believe that it's been a decade since I started Gertie's New Blog for Better Sewing! Starting my independent pattern lineÌýmeant I needed a new online home, and I debated a lot about what to do with this blog. In the end, the idea of a fresh start was really appealing. So much has changed in my life in the past ten years, and a beautiful new blog seems like just the thing to symbolize that. (I'm like a butterfly or something!) There will eventually be an archived spot there where you can visit all those posts from the past ten years, andÌýÌýis still here online for you to read.Ìý

But for now I'm excited to fill up my new space with beautiful sewing, like the new Rita Blouse Sew-Along.ÌýÌýI hope you'll visit !Ìý

I've been back from my whirlwind Australia trip for two weeks, and it was so fabulous that I feel the need to sit down and write a little recap. Overall, I just have to say how welcome I felt by everyone I met and worked with. Am I really famous in Australia, or are you all just really nice? Everywhere I went, I was greeted with excitement and even little presents and snacks and flowers! So sweet.Ìý
The main reason for the trip was that had just released a new . I have Spotlight and Fabric Traditions to thank for making the trip happen, and I couldn't be more grateful.

I started my trip in Brisbane! I stayed at Sewing Lounge with owner Kristina and her wonderful husband and cats. We all hit it off beautifully and it was like staying with old friends.
Me and Kristina of Needlefruit in BrisbaneIn true Gertie fashion, the first picture I took in Australia was of their cat.


They took me to see koalas and kangaroos and wallabies almost immediately! Here's me with a wallaby, looking both thrilled and jet lagged.


The next day, I started my tour of Spotlight appearances, visiting stores in Everton Park and Mount Gravatt. Love the displays! We had a lovely crowd in both stores. For these events, I brought a suitcase full of dresses and did a short presentation on the fabrics and construction techniques involved in each of them, followed by a Q&A session and book signings. I got to meet all sorts of lovely sewists.


Next I taught my two day workshop at Needlefruit to a wonderful group of women. For these workshops, I have everyone make the basic bodice and a skirt of their choice from Gertie's Ultimate Dress Book. There's a strong focus on fit, and everyone leaves with a new dress and a custom-fit basic bodice pattern.

The last evening, they threw me a special party at Needlefruit! I met all sorts of ladies, and did a dress presentation and long Q&A. It was super festive. Vicki wrote the nicest recap of the evening .


The next day, I flew to Melbourne and immediately drove to Spotlight Bayswater to do a Meet & Greet. (Hey, driving on the other side of the road is an adventure!) The Bayswater event was packed, with a long line for book signings. And dogs!

Everyone wore Gertie dresses and it's the best thing ever


Book signing line!
I taught my two day workshop next at Spotlight Bayswater.





I also was thrown a fabulous party right in Melbourne at ! Everyone dressed up in Gertie fabrics and patterns and made me feel like a princess in a room full of princesses.








After a day off in lovely Melbourne, I flew to Sydney. Guys, I loved Sydney SO much. It's just beautiful.

I did two Spotlight Store appearances at Lidcombe and Castle Hill. I started to get goofy with the mannequins and signage at this point.






I was taken to a lovely dinner by Brendon and Tessa of Spotlight, who took care of me for the entire trip. We went down to the harbour at night and I've never seen anything so pretty.

Thank you, Brendon and Tessa!

I had some down time to explore Sydney, and two of my favorite things were trying on vintage dresses at in Newtown and going dancing at Ìý(Thursday nights are rockabilly nights!). Seriously, did I mention I loved Sydney? I didn't want to leave!

Go to this!ÌýI finished my trip at , where we did a evening party followed by a two-day workshop.

Giving a talk at Bobbin & InkTeaching at Bobbin & Ink
Donna cutting her Gertie fabricWell, that's the short version. All I can tell you is that it was magical, and I can't wait to come back. (I'm thinking about a November trip!) Thank you to everyone who helped organize, hosted me, welcomed me, and generally made me feel like the luckiest girl with the best job in the world.Ìý

In case you've missed it on my other social media, I have big news! I launched a for a line of independent sewing patterns called Charm Patterns by Gertie. I'm thrilled to say that I'm over double my goal, but there's still time to contribute and pre-order your patterns. Any additional funds I receive at this point will help me dream a bit bigger about this line.

Please visit the to learn more!

Readers, this trip has been in the works for a while and now it's coming up FAST! In just two weeks I will be flying to the land down under to promote and to do a series of dressmaking workshops.

Here is a breakdown of my workshops and other events! (Please note that some details still need to be posted in places; I will update as necessary.)

Brisbane

Tuesday, May 2nd, 11:00 am to 1:00 pm: Spotlight Store, Meet & Greet and Book Signing.

Tuesday May 2nd, 3:30 to 5:30 pm: , Meet & Greet and Book Signing.

SOLD OUT! Wednesday and Thursday, May 3rd and 4th: Two Day Dressmaking Workshop at . Please click for all the details and to register! Two full fabulous days of fitting and sewing technique.

Thursday, May 4th, 6:00 to 8:00 pm. . Register .

Melbourne

Friday, May 5th, 6:00 to 7:00 pm:Ìý,ÌýMeet & Greet and Book Signing.

SOLD OUT! Saturday and Sunday, May 6th and 7th, 9:00 am to 4:00 pm:ÌýTwo Day Dressmaking Workshop atÌý. Two full fabulous days of fitting and sewing technique. Registration details will be posted in the next day or so. In the meantime, you can email me at [email protected] if you are interested in this class; I will be handling the registrations.

Saturday, May 6th, 7:00 to 9:00 pm: . AÌýfun evening of drinks, "Sew & Tell" and, chatting about my dresses, sewing patterns, books, blog and more!

Sydney

Wednesday May 10th,Ìý11:00 am to 1:00 pm:ÌýSpotlight Store, Meet and Greet and Book Signing

Thursday May 11th, 11:00 am to 1:00 pm: Spotlight Store, Meet and Greet and Book Signing

Friday, May 12th, 6:00 pm to 9:00 pm: Q&A Evening at . The event will be live on at 10 am 4/19.

SOLD OUT! Saturday and Sunday, May 13th and 14th, 9:00 am to 5:00 pm: Two Day Dressmaking Workshop at Bobbin and Ink. Please the store for details.

I look forward to meeting all of you!

I'm thrilled to announce that I will be offering a two-day dressmaking course in Melbourne, Australia, at theÌý. Spotlight is sponsoring this class at a special rate and space is extremely limited.Ìý

Here are the details!

When:ÌýSaturday and Sunday, May 6th and 7th. 9:00 am to 4:00 pm each day.

Where:Ìý

Cost:Ìý$240 AUD. You will be invoiced via Paypal once your registration is accepted; please make your payment within 24 hours to keep your space.Ìý


Class Description:ÌýUsingÌýGertie's Ultimate Dress Book, students will learn fit a basic bodice pattern and walk away with your own custom variation of a sleeveless dress. There will be a strong focus on fit, with everyone being custom-fitted by me. You will spend the rest of the class learning my tested techniques for sewing and pressing darts, creating perfectly neat all-in-one facing, a vintage-style lapped zipper and much more.Your finished dress will come together using a choice ofÌýthe basic jewel neckline, V-neck, or elegant narrow shoulder. Students will choose to pair with this with one of three skirts (A-Line, Three-Quarter, or Pencil) to make the dress your own.Skill Level:ÌýThis class is not suited to absolute beginners. It is for people who are confident with using their sewing machine, reading patterns, and who have completedÌýseveral garments before, including at least one dress.ÌýSupplies:ÌýMachines are provided by Spotlight. Students must bring their own copy ofÌýGertie's Ultimate Dress BookÌý(copies will be available to buy on the first day of the workshop),Ìýbasic sewing supplies, fabric, thread, interfacing, and a zipper. (Detailed supply list will be provided upon registration.) How to Register Fill out the formÌý.ÌýOnce your registration is accepted, I will send you a Paypal invoice via email. Please pay the invoice within 24 hours, or your space will be given to the next person on the list.ÌýSpace is very limited, but please keep in mind that I will be doing other events in Melbourne. Also, Spotlight will be a running a competition for two more spaces in this workshop (details to come). So if you miss out, you may still win a spot!

I hope to meet you soon!

Readers, this trip has been in the works for a while and now it's coming up FAST! In just two weeks I will be flying to the land down under to promote and to do a series of dressmaking workshops.

Here is a breakdown of my workshops and other events! (Please note that some details still need to be posted in places; I will update as necessary.)

Brisbane

Tuesday, May 2nd, 11:00 am to 1:00 pm: Spotlight Store, Meet & Greet and Book Signing.

Tuesday May 2nd, 3:30 to 5:30 pm: , Meet & Greet and Book Signing.

Wednesday and Thursday, May 3rd and 4th: Two Day Dressmaking Workshop at . Please click for all the details and to register! Two full fabulous days of fitting and sewing technique.

Thursday, May 4th, 6:00 to 8:00 pm. Drinks and Meet & Greet at . Contact the store for details.

Melbourne

Friday, May 5th, 6:00 to 7:00 pm:Ìý,ÌýMeet & Greet and Book Signing.

Saturday and Sunday, May 6th and 7th, 9:00 am to 4:00 pm:ÌýTwo Day Dressmaking Workshop atÌý. Two full fabulous days of fitting and sewing technique. Registration details will be posted in the next day or so. In the meantime, you can email me at [email protected] if you are interested in this class; I will be handling the registrations.

Saturday, May 6th, 7:00 to 9:00 pm: . AÌýfun evening of drinks, "Sew & Tell" and, chatting about my dresses, sewing patterns, books, blog and more!

Sydney

Wednesday May 10th,Ìý11:00 am to 1:00 pm:ÌýSpotlight Store, Meet and Greet and Book Signing

Thursday May 11th, 11:00 am to 1:00 pm: Spotlight Store, Meet and Greet and Book Signing

Friday, May 12th, 6:00 pm to 9:00 pm: Q&A Evening at .ÌýPleaseÌýÌýthe store for details.

Saturday and Sunday, May 13th and 14th, 9:00 am to 5:00 pm: Two Day Dressmaking Workshop at Bobbin and Ink. Please the store for details.

I look forward to meeting all of you!

This is the last post on sewing your dress, everyone! Time to hem.Ìý
Let's start with View A. Press the entire hem to the inside of the dress 3/4".Then turn in the upper edge of the fabric by 1/4" and press. I had serged my fabric so I had an easy edge to turn in (I confess this was sort of unintentional; sometimes I serge the lower edge of the fabric as a matter of course before I construct the seams). Another option would have been to leave the serged edge exposed on the inside, without doing another fold.
Stitch along the edge of the hem fold all around the dress. I like to use my edgestitch foot for this.
Give the whole thing a final press and you're done!

For view B, start by finishing the lower edges of the slit opening. Turn the 1" slit to the outside of the dress and pin at the lower edge.
Stitch along the lower edge, using a 1" seam allowance.
Trim diagonally into the corner fold to reduce bulk.
Turn the corner right side out and press. Turn up and press the rest of the hem 1" to the inside of the dress.
ÌýTurn the upper raw edge of the hem in 1/4". You can kind of open out the hem and use the tip of your iron to do this.

Turn the entire hem to the inside of the dress again (it's now 3/4" wide). Pin in place.

Edge stitch along the fold of the hem all the way around. Done!

Two finished dresses!
I hope you all have enjoyed the sew along! The is still growing like crazy and is very active. I've loved doing this one. I'll be running more in the future, and have some exciting news about what's next, so please stay tuned!

We're so close! Today I'm going to show you the steps for attaching the facing, so you'll finally have a nice finished neckline edge.

Start by ironing your interfacing on to your facing pieces. I make sure to always use a press cloth and a spritz of water for this step, and hold the iron in place until the glue fuses (don't rub!).



Next, sew the front facing to the back facings at the side seams. The pieces look a little funny, so just remember that there are notches to help you match everything up. You can always refer back to your tissue pattern pieces if you're unsure as well.Ìý
Press the seams open.Ìý
Finish the lower edges of the facing unit by serging, pinking, or zigzagging.Ìý

With the interfaced side up, turn in the left back seam allowance 3/4". This is where the overlap side of the zipper goes.Ìý
Next, I highly recommend drawing in your stitching lines on your facing at the strap connection points. These points are a little tricky to sew because of all the pivoting. I used a mechanical pencil and my clear gridded ruler to draw in the stitching lines, which are 5/8" from the edges.Ìý
With the straps down and out of the way, pin the facing unit to the dress all the way around the neckline, taking special care that the straps are positioned between the pivot points you marked in above. I put a pin on either side of the strap to keep it from slipping, like so:Continue to pin all the way around the neckline, matching underarms and notches.ÌýAt the overlap side of your zipper, the overlap will extend 1/8" past the facing.And remember that you turned in the upper edge so they won't match there either. They'll look like this.
On the underlap side, the facing will extend 5/8" past the underlap.Stitch all the way around the neckline, carefully pivoting at the strap connection points. You'll need to keep repositioning the straps as you stitch. Go slowly!Check your stitching at these points; it's still easy to correct things if anything looks funny.Ìý
I want you to promise me that you will now take lots of time and care trimming, grading, and clipping your seam allowances! Start by cutting diagonally across any corners.Ìý
Then trim the facing seam allowances down to about 1/8", and the dress seam allowances to about 1/4" (this is called grading and it reduces bulk in your seam allowances.)
Clip carefully into your seam allowances around the neckline and armhole curves. These clips should be about 1/2" apart. They will help your curves lay flat rather than bunching.Ìý
Pull the straps to the outside.Ìý

Next, you'll understitch your facings. Stitch about 1/8" away from the seamline on the facing, keeping the seam allowances pressed toward the facing so you catch them in your stitching. Keep the seam very smooth and taut as you sew.ÌýThe straps are going to interfere with your understitching because it gets too tight and small to continue. Go as far as you can near each strap, and then back stitch and break your stitching. Start again on the other side of the strap.Ìý
Press your facing to the inside. Doesn't it look lovely!Ìý
You'll need to pin the facings in place on either side of the zipper tape and then slip stitch them in place.Ìý


At the underarm seams, tack the facings in place used a doubled up strand of thread and taking several stitches on top of each other.Ìý
All that's left now is the hem!

Okay, it's time to sew the lapped zipper. I almost always use lapped zippers in my dresses because it gives them that vintage look. Lapped zippers aren't difficult, but they do take practice. The more you do, the easier they are! I don't mark or baste my zippers. If this method doesn't work for you, there are many tutorials out there showing other methods.

Start by turning in and stitching the excess tape at the top of the zipper. You can stitch this by machine if you use a zipper foot.


Next we'll finish off the back neckline on the left side of the zipper opening. Turn the seam allowance to the outside of the dress and pin.


Now stitch across the seam allowance at the upper back neckline.


Clip into the stitching and trim the rest down so it looks like this.


Turn the seam allowance to the inside of the dress, forming a finished corner at the upper edge. Press this side of the seam allowance in 5/8" all the way down the zipper opening.


On the other side of the zipper opening (the right side as you're looking at the outside of the dress), press in the seam allowance 1/2" all the way down.

Because the seam allowance isn't pressed in the full amount, you'll have a tiny 1/8" underlap at the base of the zipper opening.

Now that your seam allowances are prepped, it's time to install the zipper. Start on the right side (as you're looking at the garment). This is the underlap side of the lapped zipper. Place the zipper behind the pressed seam allowance, so that the fold of fabric is right next to the zipper teeth. The zipper should start 5/8" down from the raw edge of fabric at the neckline.

Pin all the way down and then stitch the zipper in place using a zipper foot on your machine. Open the zipper and stitch as close to the fold of fabric as you can.



Now pin the overlap side of the zipper. Start at the waist. Close the zipper again and pin the seam allowance in place so that it just covers the line of stitching you did in the last step.

Your pins go the to left of the zipper teeth. Pin all the way down to the base of the zipper, and then al the way up to the neckline.

Here's a video to help you understand this step.



Once you've pinned, open the zipper again and top stitch the overlap side of the zipper at 3/8", using a mark on your needle plate to guide your seam allowance as usual (keep in mind that you may have needed to change your needle position for your zipper foot, so this will change the distance of your needle from the marks on your plate. Measure if you're unsure!).

When you get to the point you see below, that means you need to close the zipper again (with the needle all the way down!).

Close the zipper and finish off the topstitching in as straight a line as you can (align your presser foot with your previous stitching to guide you). When you get to the base of the zipper opening, pivot and stitch straight across the bottom of the zipper (beware any metal stops that may break your needle).

Your zipper is in! I know that's a lot to process, so please let me know if you have any questions!

How are your dresses coming? Don't forget to post pictures in the ; I love seeing everyone's work.

Today we're sewing the skirt for View B, the pencil skirt version! I'm making mine Tiki-style in one of my new Hawaiian print cotton poplins, available .

Grab your skirt pieces; you'll have two for the back and one for the front.

First, stabilize the skirt center back zipper opening, above the circle. I use strips of fusible interfacing for this.


I also like to finish my raw edges using my serger at this point. Finish the sides of each skirt piece, leaving the top and bottom unfinished. When you get to the skirt back slit, serge as carefully as you can around the angle. (If you are not using a serger, use another method like zigzagging or pinking after the seams are sewn.)

Sew your darts! You can revisitfor a dart refresher if you need one.

Press the back darts toward center back.



And your front darts toward center front.

Next, check out step 22 in your instructions. This is Butterick's method for reinforcing the slit, which gets a lot of wear when you're walking. You can also use strips of fusible interfacing, or selvages from your fabric if you don't have seam binding, like pictured here.

Cut two 2" pieces of your reinforcement material.

Center the pieces over the circle at the top of the slit on each back skirt piece and stitch in place by hand, positioning your stitching within the seam allowance so it won't show on the outside of your dress.

Next, stitch your skirt back pieces together. Start at the zipper circle mark, and when you get to the vent mark (where the seam binding is), backstitch and then lengthen your stitch to a basting length, 4-5mm. Note that when you get to the slit, your seam allowance is 1".


Press the back seam open.Ìý

After pressing, you can remove the basting in the slit. The slit will look nice and crisp since you basted and pressed it.

Now sew the skirt front to the skirt back at the side seams. (Note: If you think you may need to adjust the fit of your skirt, it's a good idea to do a basted fitting. Use a long stitch length to sew the skirt seams, try on the skirt, and then make any adjustments before using a regular stitch length.)

You now have a fully sewn skirt.


Press the skirt side seams open, using a ham to press the hip curves.


Time to stitch the skirt to the bodice. When you do this, keep in mind that you'll be matching side seams, notches, darts, and princess seams. Take a look at the two pieces so you have an idea of how they go together.


Put the bodice and skirt right sides together and pin carefully, making sure that seams and darts stay in the direction you pressed them in.


Stitch around the waistline seam. After stitching, carefully check your waistline to see if everything is properly matched. You may need to rip out small portions and re-stitch.

Finish the waistline seam as one, trimming down to about 3/8". Press the seam toward the bodice.


And now you have a completed pencil skirt!


Later this week, we'll be moving on to the zipper for both views.